I’ve officially joined the pc race, what do y’all think (I’m a rookie so don’t go off on wires or hardware)
What about it?
Cpu/ intel i7 10700f
Memory 32gb ram
Ssd/ m.2 nvme 1tb
Gpu/ nvidia msi rtx 3050
Motherboard/ASUS prime z590-p
Power/segotep 750w
CPU cooler/Id-cooling aio water cooler
Tip to anyone buying 4090 Aero Gigabyte
What about it?
Hello there,
If you are buying 4090 from Gigabyte and it will be Aero - make sure to check your motherboard cables before you buy because their anti “sag bracket†is pretty large and it did not fit with my “Asus rog strix B650a gaming wifi†motherboard.
Solution: cut it, spray paint it, install it
Get to finally use my welding skills for my PC build
What about it?
A very cheap case for 30 bucks. The sheet metal is literally catching the motherboard with the standoffsby only 2 mm. So in the pic my plan is to grind the rivets and drop said section down, clean powder coat, and tack the sheet metal (as it is not going to be structural). Then spray the ground areas with a slight coat of clear coat (for now). Then I will reassemble the PC. For any questions about specs, it is going to be a xeon w-3175x (ebay build, I spent about 2200 us dollars) for workstation. And yes, the board is atx and the case does "accept" atx, however the bolt holes align, just some case misalignment.
Waited outside all day for delivery guy. Didn't show. Called carrier, got them to hold it, was told couldn't pick it up till monday. Then, 10 minutes later it was ready for pickup! I am finally adding 2100 gamer points to my GPU specs. Paired with 3200Mhz DDR4, B450M, NVMe SSD, and a Ryzen 9 5900X