Help, GPU frequencies very unstable on GTX 950 after failed OC attempt, no adjustments are set in place right now except fan curve, normal frequencies are way higher

image
Read also:

Tiny11 - bloat be gone!

What about it?

Even MS Edge, Game Mode and Game Bar missing ♥️

image

Pc build 1k

What about it?

“This part of my life, this little part, is called happiness”

image

I’ve officially joined the pc race, what do y’all think (I’m a rookie so don’t go off on wires or hardware)

What about it?

Cpu/ intel i7 10700f Memory 32gb ram Ssd/ m.2 nvme 1tb Gpu/ nvidia msi rtx 3050 Motherboard/ASUS prime z590-p Power/segotep 750w CPU cooler/Id-cooling aio water cooler

image

Should I be worried about this kink?

What about it?

Flow seems pretty normal still but the only thing I have to indicate that is the little indicator in the top right where the hose is connected.

image

This Game Looks insane on an Ultrawide Monitor (Miles Morales)

image

Just got a new monitor: Acer Nitro KG243Y 100Hz

image

Tip to anyone buying 4090 Aero Gigabyte

What about it?

Hello there, If you are buying 4090 from Gigabyte and it will be Aero - make sure to check your motherboard cables before you buy because their anti “sag bracket” is pretty large and it did not fit with my “Asus rog strix B650a gaming wifi” motherboard. Solution: cut it, spray paint it, install it

image

Finally have a pc!

image

The Nvidia situation in 2023 simplified:

image

Get to finally use my welding skills for my PC build

What about it?

A very cheap case for 30 bucks. The sheet metal is literally catching the motherboard with the standoffsby only 2 mm. So in the pic my plan is to grind the rivets and drop said section down, clean powder coat, and tack the sheet metal (as it is not going to be structural). Then spray the ground areas with a slight coat of clear coat (for now). Then I will reassemble the PC. For any questions about specs, it is going to be a xeon w-3175x (ebay build, I spent about 2200 us dollars) for workstation. And yes, the board is atx and the case does "accept" atx, however the bolt holes align, just some case misalignment.

image