How would these be constructed?
I’m at an indoor pool that’s covered by a dome and am curious about how the wooden beams? Rafters? Supports? would have been built.
They look to be many lengths of wood glued together, but how is the curvature done?
The height of the dome is at least 30m high which adds to the mystery!
Does anyone here have any ideas? I’d be interested to see a build video of something similar as well.
Planter sealing & finishing
I'm making a coffee table with a small planter channel around the back and sides for our patio and I'm thinking about painting it, or possibly a dark stain and poly. My question is, should I treat the inside of the planter area that will hold dirt and plants to keep moisture from soaking through the wood and damaging the finish on the outside? If so, what would you all recommend?
Help with some ideas
I have a client that wants a walnut table made for this space. Approximately 8’ x 5’. He figures using metal legs bolted down make the most sense for the tighter area. I do agree, but I’d love to make some legs for this myself. Any suggestions for some leg styles that could work well in this spot? Or should we just stick with the metal legs? Thanks for your time.
What would be the easiest way to remove this laminate from a solid wood dining table?
I want to remove the laminate off of an old dining table I inherited because it is scratched and you can’t get it wet or set anything remotely hot on it. It’s a solid wood table with a decent grain underneath from what I could tell from the bottom of the table. I’m pretty sure it is laminate and not veneer.
I made a laundry basket from oak and a Chinese post bag
Basement Workshop?
I recently bought a house with an unfinished basement and am thinking about turning it into a workshop area. Is there anything I should consider prior to hauling my tools down there and starting to set it up? I'm a little concerned about dust collection and keeping it clean and dry.
Giant "C" for my living room
The C is mdf and the wood is tongue and groove paneling.
How could these be made, kind of wood, machine used and treatment to make it food friendly
Farm gate sign in Macrocarpa
Free hand routed with a 6mm compression bit and finished with marine varnish. A father's Day gift for my father. Turned out ok for a first attempt I think.
Freud blade table saw safe?
Is this safe for a table saw it says mitre saw. But is that just because of the size? My table saw is small and takes a 216mm blade .
https://www.screwfix.com/p/freud-wood-mitre-saw-blade-216mm-x-30mm-48t/770kj?ref=SFAppShare
Help with stained MDF cabinets
My house has MDF cabinets doors and ends. They’re stained and we’re built about 7 years ago. I’ve never dealt with stained MDF before. This is on one of my cabinet ends and I’m not sure how it got there. Maybe bleach or something else splashed up?I’ve tried to rub some of the “touch up†stain I was given but it does nothing and just wipes off. Any suggestions on how to fix this shirt of sanding it down and restaining the entire piece?
