Cooling advice fan configuration

Current set up: I need help with some cooling/fan advice. The current set up/fan configuration shown in the picture(red arrows). I’m using a CIT flash micro ATX case(not the best at airflow), I’ve modded the case to remove the glass front panel and changed it to a mesh panel for better air intake. The fans are your standard ones that come with case. You cannot control the speed, just runs on full speed all the time. Running most games the CPU temp is between 65-78 degrees. I want to try and bring that down if possible with better fans/configuration. Question: should I replace the existing fans with decent airflow fans? Should I add another fan as an exhaust at the top (green arrow)? I don’t really wanna go down the AIO route if I don’t need to.

What's wrong with this ?

Hey guys , I need help with this. My laptop don't charge anymore even after changing the battery. I checked this plug , make the pins closer and it worked, I remounted the PC and it didn't work anymore. Retried the operation, nothing...

Crashing on boot - running out of ideas....

Still works after leaking water bottle that had it partially covered by water (primarily the bottom which was has open vents)

Unlike a lot of people on the internet I didn’t turn it on right away. Got most water off with cloth, then sprayed ipa in the bottom where water leaked through on the pcb and used compressed air to blow it out again. Then let it dry in sun for 30 minutes (don’t want battery getting to hot). Repeated that ipa and compressed air a few times. Then didn’t turn it on for a day.

Aio Configuration

Hello! Did i mount the aio correctly? If i didn't please let me know how i can mount it correctly.

Msi Geforce 1080 Maybe 980Ti

Bios booting problem

Hello guys please help I got 2 pc one old one brand new ,so the problem started with the old pc I want it give it to my little brother and I double checked that it works after if 3 months of not being used. I connected to a monitor to test if it’s working I get no video input on monitor, tried a second monitor same results . Tried to see if something was not connected properly. So I thought maybe a cmos reset would help. I removed battery for 30 secs nothing happened, i tried the pins again Same results . So I got the bright idea to remove cmos battery from my new pc and put it in the old and now I have 2 computers not booting with same problem. Please help

Bad luck Witch king (not OC)

All I did was give you a little nudge

What AI thinks it would look like if Frodo rode the eagles to mordor

Wake up